Windows 11 / Open Network Connections and Identify Network Adapters
To view the network adapter list in Windows 11, open the Run dialog and enter ncpa.cpl to open Network Connections. In this window, you can distinguish between Ethernet, Wi-Fi, and some virtual connections. If your goal is simply to check the current internet connection status, you can also look at the Network & internet page in Settings.
Open Network Connections from the Run Dialog
- Press Windows + R to open the Run dialog.
- If there is existing input, clear it and enter the following name exactly, including the period.
ncpa.cpl
- Press Enter or select OK.
- Check that Network Connections opens and displays the connections configured on your PC.
Microsoft’s instructions for opening Network Connections also describe entering ncpa.cpl after pressing Windows + R. That document concerns disconnecting an incoming virtual private network (VPN) connection; this guide uses only its window-opening procedure. Opening the window does not disconnect an adapter or change IP (Internet Protocol) settings.
Distinguishing the adapters displayed in the list
A network adapter is a device or software connection interface that the PC uses to send and receive data over a network. Having multiple items in the list means there are multiple connection methods, not that all items use the Internet simultaneously.
| Adapter type | What to check |
|---|---|
| Ethernet | This item is for wired networks. If your PC or a USB expansion device has multiple wired adapters, multiple items may appear. |
| Wi-Fi | This item is for wireless networks. On PCs without a wireless device, this item may not appear. |
| Virtual connection | Items created by virtual private network (VPN) or virtual machine software may appear. Do not delete them just because the name is unfamiliar. |
Because users can change connection names, do not determine the device based solely on the name. Check the device description and connection status shown with the item, and compare it with the actual wired or wireless connections in use. On company or school PCs, names and configurations set by administrators may be applied.
For example, on a laptop connected to the Internet via Wi-Fi without plugging in a wired cable, both the wireless connection and the unused wired adapter may appear. This is an example of reading the list, and the presence of a disconnected wired item does not mean that the current Wi-Fi Internet is also disconnected.
Check current Internet connection status in Settings
The adapter list and Windows’ assessment of Internet connection status serve different purposes. To first check whether the network you are currently using is connected, use the following path.
- Press Windows + I to open Settings.
- Select Network & internet.
- Read the connection status displayed at the top of the screen. Also, check which connection you are actually using, Wi-Fi or Ethernet.
- If you need detailed information, select the specific Wi-Fi connection or Ethernet entry. If you only need to check, there is no need to operate the Edit button or the On/Off switch.
Microsoft’s guide to essential Windows network settings describes this path and the status shown at the top. To find an IP address, you can also refer to our Korean-language guide to checking IP addresses in Windows 11.
Even if the network is connected, certain websites or apps may still be inaccessible. If you record which connection is in use and which target is experiencing issues, it becomes easier to separate problems affecting the entire PC from problems affecting specific services.
Separate status checking and setting changes
In the verification procedure described in this article, there is no need to disable adapters, delete them, or enter an IP address. You only need to read the list and close the window, so there are no settings to revert. If you accidentally opened the properties window but did not change any values, you can close it by pressing Cancel.
If you select to disable or disconnect the adapter, communication on that path may be interrupted. If it is a remotely connected PC, the remote connection may also be disconnected, so do not test this function just to check the status.
Network reset is not a function to reopen the window. According to Microsoft's Wi-Fi Connection Troubleshooting Guide, resetting reinstalls the adapter, restores settings to default, and may require setting up VPN software again. There is no reason to perform a reset first when trying to view the list of connections.
When the window does not open or the desired connection is not available
- Check the spelling and period in ncpa.cpl. You must enter it in the Windows Run dialog, not as an internet address or search term.
- If an organizational policy message restricting execution appears, note the message and contact your administrator. Just opening the window itself can be restricted, as explained in Microsoft's Explanation of Network Connection Access Restriction Policy.
- If Wi-Fi items are not visible, first check whether the PC has a wireless adapter. You can open Device Manager by right-clicking the Start button and check if the device is in the Network Adapters category. Do not remove the device at this stage.
- When requesting technical support, provide the connection name, device description, displayed status, and error messages. When sharing your screen, make sure it does not include information that does not need to be shared, such as network names or addresses.




